Showing all 16 results

Showing all 16 results

CM Waterproofing Accessories and Waterguard Drainage Components

CM Waterproofing Accessories include the specialist fixings, seals, drainage channels, outlets and maintenance components needed to complete a cavity drainage installation correctly.

At Toner Dampproofing Supplies Ltd, we supply CM membrane accessories and Waterguard drainage components for basement waterproofing, cellar conversions, internal damp management and below-ground construction projects across Northern Ireland and the United Kingdom.

These products are designed to work alongside suitable cavity drain membranes, helping installers secure the membrane, manage water at critical wall and floor junctions, direct collected water towards an outlet or sump system, and retain access for future inspection and maintenance.

CM Waterproofing Accessories are relevant for contractors, surveyors, waterproofing specialists, builders, property managers and capable DIY customers working on specified cavity drainage systems.

Shop CM Waterproofing Accessories

The CM Waterproofing Accessories range includes:

Each product has a specific role within the overall waterproofing and drainage detail. Selecting the correct components depends on the membrane used, the structure, the drainage route, the intended internal finish and whether the project requires a sump chamber or gravity discharge.

CM Membrane Plugs and Plug Seals

Membrane fixings are an important part of wall-based cavity drainage installations.

CM Brick Membrane Plugs

CM Brick Membrane Plugs are used to secure compatible cavity drain membranes to masonry substrates such as brick, blockwork, stone and concrete.

The correct fixing detail depends on the wall construction, membrane type, proposed finish and waterproofing specification. Fixings should be installed in line with the membrane manufacturer’s instructions, with care taken to avoid damaging the membrane or creating unnecessary points of water ingress.

Shop CM Brick Membrane Plugs

CM Plaster Membrane Plugs

CM Plaster Membrane Plugs are designed for compatible cavity membrane installations where a plaster or plasterboard finish is proposed.

They help secure the membrane while providing a suitable fixing point for the selected internal finish. Always confirm the intended finish system, substrate condition and installation detail before choosing plugs.

Shop CM Plaster Membrane Plugs

CM Plaster Plug Seals

CM Plaster Plug Seals are used with compatible plaster plugs to create a controlled seal around membrane fixings.

They are particularly useful where a cavity drain membrane is being fixed to an internal wall and the waterproofing detail requires the fixing penetration to be sealed correctly.

Shop CM Plaster Plug Seals

Waterguard Perimeter and Floor Drainage Channels

A Type C cavity drainage system needs a planned route for water management.

Waterguard drainage channels are used to collect water from behind cavity drain membranes and direct it towards a suitable outlet, drainage point, sump chamber or pump system. The correct channel layout should be determined as part of the waterproofing design.

Waterguard Perimeter Drainage Channel

Waterguard Perimeter Drainage Channel is designed for use around the wall-to-floor junction in suitable cavity drainage systems.

This location is often a key collection point for water entering behind wall membranes or rising through floor construction. Perimeter channels can help direct collected water towards the planned discharge route.

Shop Waterguard Perimeter Drainage Channel

Waterguard Floor Drain Channel

Waterguard Floor Drain Channel is used where drainage needs to be formed across floor areas or where the project design requires a channel away from the perimeter.

It may be considered for larger floor areas, stepped foundations, internal drainage routes or other layouts where perimeter drainage alone is not suitable.

Shop Waterguard Floor Drain Channel

Waterguard Channel Connections and Direction Changes

A drainage channel system must be able to follow the room layout and connect correctly to the intended outlet route.

Waterguard Jointing Section

Waterguard Jointing Sections connect suitable lengths of drainage channel, helping form a continuous drainage route.

Shop Waterguard Jointing Sections

Waterguard Stop End

Waterguard Stop Ends are used to finish a channel run where no further connection is required.

Shop Waterguard Stop Ends

Waterguard Swept Corner Piece

Waterguard Swept Corner Pieces allow the drainage route to continue around internal or external corners while maintaining a smooth directional change.

Shop Waterguard Swept Corner Pieces

Waterguard T-Piece

Waterguard T-Pieces allow channel runs to join or branch where the drainage layout requires water to be directed towards more than one route or outlet point.

Shop Waterguard T-Pieces

Waterguard Outlets and Discharge Connections

Collected water must be directed to a suitable drainage point, sump chamber, pump system or approved discharge route.

Waterguard 50mm Channel End Outlet

The Waterguard 50mm Channel End Outlet is used to connect a suitable channel run to a compatible 50mm outlet route.

Shop Waterguard 50mm Channel End Outlets

Wykamol Universal Channel Outlet

The Wykamol Universal Channel Outlet provides a connection point between compatible drainage channels and the designed discharge route.

It should be selected where the project design requires a larger or more adaptable channel outlet arrangement.

Shop Wykamol Universal Channel Outlets

Jetting Eyes and Maintenance Access

A cavity drainage system should be designed with future maintenance in mind.

Jetting eyes provide planned access points that can support future inspection and cleaning of compatible drainage channels. They can be particularly useful where silt, scale or debris may need to be removed from a drainage route over time.

Waterguard Extended Jetting Eye

The Waterguard Extended Jetting Eye with 50mm waste outlet provides a combined access and outlet option for suitable drainage details.

Shop Waterguard Extended Jetting Eyes

Waterguard Flexible Jetting Eye

The Waterguard Flexible Jetting Eye provides a flexible access point for suitable channel configurations where the drainage design requires maintenance access.

Shop Waterguard Flexible Jetting Eyes

Profile Strips, Condensation Strips and Finishing Accessories

The range also includes specialist accessories for cavity drainage membrane details and compatible finishing systems.

Wykamol CM Geotextile Profile Strip

The Wykamol CM Geotextile Profile Strip is used in suitable geotextile membrane and drainage details to help form a controlled edge or termination.

Shop CM Geotextile Profile Strips

Wykamol Condensation Strip

The Wykamol Condensation Strip can be used within suitable membrane installations where the selected system detail requires a condensation-control accessory.

Always check the individual product instructions and the proposed wall finish before installation.

Shop Wykamol Condensation Strips

Dry Mesh Accessory Kit

The Dry Mesh Accessory Kit provides selected accessories for compatible mesh membrane and dry lining applications.

Confirm the membrane type, fixing method and proposed finish before ordering.

Shop Dry Mesh Accessory Kit

Choosing the Right CM Waterproofing Accessories

The correct accessories should be selected after the cavity drain membrane, drainage route and intended internal finish have been considered.

For Wall Membrane Fixing

Choose suitable CM Brick Membrane Plugs or CM Plaster Membrane Plugs based on the wall construction and internal finishing method. Add compatible plug seals where the waterproofing detail requires them.

For Perimeter Water Collection

Choose Waterguard Perimeter Drainage Channel where the design requires water to be collected at the wall-to-floor junction.

For Floor Drainage Runs

Choose Waterguard Floor Drain Channel where drainage needs to pass through floor areas or follow a specified internal route.

For Channel Changes and Connections

Use Jointing Sections, Stop Ends, Swept Corner Pieces and T-Pieces to create the planned drainage layout.

For Outlet and Maintenance Access

Choose the appropriate channel outlet and include jetting-eye access where the system design requires future inspection or cleaning.

Important Type C Waterproofing Guidance

CM Accessories are components within a wider cavity drainage system. They do not replace waterproofing design, correct membrane selection, a suitable drainage route, sump and pump provision where required, or ongoing maintenance.

A complete Type C waterproofing system may include:

  • Suitable cavity drain membranes.
  • Compatible CM membrane plugs and sealing details.
  • Perimeter or floor drainage channels.
  • Outlets to a suitable drainage route.
  • Sump chambers and pumps where gravity drainage is not possible.
  • Maintenance access points.
  • Suitable internal wall and floor finishes.
  • A planned inspection and maintenance approach.

For basement conversions, habitable rooms, high water-risk sites, complex structures or projects where water ingress could cause significant loss, seek advice from a qualified waterproofing design specialist before ordering products.

Need Help Choosing CM Accessories?

Our Technical Team can help you identify suitable CM waterproofing accessories for your project.

For practical advice, send us:

  • Photos of the area to be waterproofed.
  • Wall and floor construction details.
  • Approximate room dimensions.
  • The cavity drain membrane being used.
  • The intended wall and floor finish.
  • Details of any planned sump chamber, pump or drainage connection.
  • Any survey, drawing or waterproofing specification already available.

Contact Our Technical Team