Aquasafe 230V Alarm

Aquasafe 230V Alarm for Sump and Pump System Protection

Aquasafe 230V Alarm is a professional warning and monitoring system designed to help protect sump and pump installations from high water level issues, power loss and missed servicing. Installed as part of a basement waterproofing or pump chamber setup, it provides an early warning when conditions require attention, helping reduce the risk of flooding, disruption and pump system failure.

In below-ground waterproofing systems, quick warning matters. If water rises too high in a chamber or sump, or if mains power is lost, the end user needs to know as soon as possible. The Aquasafe 230V Alarm is designed to provide exactly that. It monitors the system and alerts the user when there is a power failure to the alarm, a high level situation in the chamber or sump, a previously recorded high level event, or a service due reminder. An internal battery is incorporated within the panel so the alarm can continue operating if mains power fails.

This makes it a valuable addition to new and existing sump systems in domestic, commercial and other below-ground environments where dependable warning and backup monitoring are important.

What Is the Aquasafe 230V Alarm?

A Dedicated Alarm Panel for Chamber and Sump Monitoring

The Aquasafe 230V Alarm is a control and warning panel used with a mini or sump float switch positioned inside the chamber or sump. The float is set higher than the activation point of the primary pump so that the alarm activates when the water level rises beyond the normal operating range.

Designed to Warn Before a Critical Issue Develops

Instead of waiting until water has already caused a serious problem, the system is built to provide an early warning so action can be taken. That could mean investigating a blocked discharge line, a pump issue, a power outage, an overdue service or another problem affecting the sump and pump setup.

Key Benefits of the Aquasafe 230V Alarm

High Water Level Warning

One of the main functions of the Aquasafe 230V Alarm is to warn the user if water rises too high in the chamber or sump. The high level alarm activates with both an LED indication and an audible alarm, helping ensure the condition is noticed quickly.

Power Failure Protection

Power cuts can leave pump systems vulnerable, especially during wet weather or when groundwater pressure is high. This unit alerts the user if mains power to the alarm is lost, and the internal battery allows the alarm panel to continue operating during that outage.

High Level Alarm Recorded Function

The alarm not only warns when a high level event is happening, it also records that the event occurred. This is useful where the site may be unattended or where the user wants confirmation that a high water level condition happened and later returned to normal. The recorded event is shown by a separate indicator until it is reset.

Service Due Reminder

Routine servicing is essential for reliable sump and pump performance. The Aquasafe 230V Alarm includes a service due reminder so maintenance is less likely to be overlooked. The panel can be set for quarterly, half-yearly or yearly service intervals, depending on the site and maintenance requirements.

Battery Backup for Added Reassurance

The panel includes an internal 6V 1.3Ah battery and can operate for up to 24 hours without mains power, subject to the battery being fully charged. This gives continued alarm protection during a mains outage, which is particularly important when the pump system is already at greater risk.

Why This Matters in Basement and Below-Ground Waterproofing

Early Warning Can Help Reduce Flood Risk

In basement waterproofing and cavity drain membrane systems, sump and pump performance is critical. If water rises too high because the pump has not activated, is overwhelmed, or another fault is affecting the system, early warning can make the difference between a manageable issue and a costly flooding event.

Suitable for New and Existing Installations

The Aquasafe 230V Alarm can be used in a range of sump and pump installations where dependable monitoring is required. It is a strong choice for basement conversions, cellar waterproofing, below-ground rooms, plant areas and other spaces that rely on a chamber and pump arrangement for water management.

Product Properties and Technical Information

Technical Specification

The Aquasafe 230V Alarm has the following core technical details:

• Power supply: 230V AC 50Hz
• Rated power: less than 10VA
• Internal battery: 6V, 1.3Ah
• Sound alarm level: 85dB
• Mains power cable length: 1 metre
• Weight: 0.5kg
• Material: ABS
• Colour: Grey
• Operating temperature: -10°C to +40°C
• Panel dimensions: 122mm height x 124mm width x 85mm depth

External Device Connectivity

The unit includes 3 volt-free contacts for connection to external devices such as dial-out telemetry or a building management system. These contacts can send signals for:

• High level alarm
• Power fail
• Service due

The volt-free contacts are intended for low voltage circuits operating at a maximum of 1 Amp.

Typical Applications

Basement Sump and Pump Systems

The Aquasafe 230V Alarm is ideal for basement waterproofing systems where a sump chamber and pump are relied upon to control water ingress.

Cellar and Below-Ground Structures

It is suitable for monitoring water levels and alarm conditions in cellars, semi-basements and other below-ground areas where a warning system is required.

Domestic and Commercial Installations

The alarm can be used in both residential and commercial settings where a dedicated high water level and power failure warning system is needed.

New Installations and Retrofit Projects

Suitable for new sump and pump systems as well as upgrades to existing installations where improved monitoring and warning capability is required.