Stormdry Masonry Protection Cream £89.99 – £432.00
Drybase Bondaid Plus (SBR) (5 L) £29.99

Dryzone Mould Resistant Emulsion Paint 5L

£59.99

Dryzone Mould Resistant Emulsion Paint 5L

Solving condensation and mould issues can be difficult. The Dryzone range contains two excellent solutions for eliminating mould growth on walls and ceilings, even in areas with high levels of condensation.

  • Resists mould growth on walls and ceilings
  • Mould-resistance lasts for at least 5 years
  • High quality ‘soft-sheen’ finish
  • Available in white or magnolia
  • Fully washable paint surface
Add to Cart
Dryzone Mould Resistant Emulsion Paint 5L
£59.99

We Deliver Across the UK & Ireland

  • 14-Day Returns
  • Place Your Order by 1:00pm for next day dispatch
Shop with Confidence

Dryzone Mould Resistant Emulsion Paint 5L
£59.99


Dryzone Mould Resistant Emulsion Paint 5L

Dryzone Mould-Resistant Emulsion Paint 5L is a premium-quality anti mould paint for protecting against the growth of unsightly black mould on walls and ceilings – even where there is persistent condensation. It is available in brilliant white and magnolia in a “soft sheen” finish.

Dryzone System Mould Resistant Emulsion Paint combines modern paint technology with advanced paint film protection, resulting in effective mould resistance for at least 5 years. The paint contains a small amount of locked-in biocide to ensure its mould-resistance. The resulting surface is also fully washable.

5 Year Black Mould Protection

Dryzone has combined modern paint technology with a high-grade protective film. It is low-odour, with a fast-drying formula that leaves a fully washable & professional quality decorative surface. Dryzone Mould-Resistant Emulsion Paint can be used as an overcoat for all major undercoat paint finishes.

Dryzone Mould-Resistant Emulsion contains a biocidal formula that prevents the regrowth of black mould for 5 years following application.

Future-proof your bathroom and free yourself from unsightly black mould with Dryzone.

Additional information

Weight 5 kg
Dimensions 30 × 30 × 30 cm
Size: No selection

5L
Brand: No selection

Dryzone
GTIN: No selection

5060132761762, 5060132761779
Part Number: No selection

DZ-AMP-5-M, DZ-AMP-5-W
Manufacture: No selection

Dryzone
Effective Treatment: No selection

Mould Killer, Mould Steriliser
Service Life: No selection

Up to 5 years​
Size(s) & Packaging: No selection

5 litre containers​
Accreditation: No selection

Compliance with Section 82 of the Environmental Protection Act 1990​
Appearance: No selection

Brilliant White, Magnolia
Storage: No selection

Store above 5°C in dry conditions, keeping the container tightly closed​
Shelf Life: No selection

12 months
Coverage: No selection

10 – 12 m² per litre
Colour: No selection

Magnolia, White

Coverage Calculator

Application

Application for Dryzone Mould Resistant Emulsion Paint 5L:

Preparation

Preparation is straightforward and very similar to normal good decorative practice.

  1. Put down dust sheets before work begins
  2. Remove any loose material such as old paint, grease, dirt, mould or defective wallpaper
  3. If mould is present, thoroughly clean the area using Dryzone 100 Mould Remover. Avoid sanding the mould area to reduce spreading of spores.
  4. Allow to dry thoroughly.
  5. For glossy surfaces lightly abrade the surface with abrasive paper avoiding inhalation of dust and wearing suitable personal protective equipment (face mask, gloves, safety spectacles etc).
  6. If necessary, apply an appropriate primer or sealer. For new or porous plaster surfaces use Dryzone Mould Resistant Emulsion Paint thinned up to 10 % with clean tap water as normal good practice. Allow to dry thoroughly. New plasterwork should be allowed to dry for 7 – 14 days before applying any paint finish.

Application

Apply Dryzone Mould-Resistant Emulsion Paint using brush or roller.

  1. Ensure the area is well ventilated. Stir thoroughly before use.
  2. Apply two coats of Dryzone Mould-Resistant Emulsion Paint. Allow the first coat to dry fully before applying the second coat.
  3. Each coat will typically be touch dry after 2 – 4 hours depending on temperature, humidity and airflow.
  4. The surface temperature during application should be between 10 – 25°C
  5. Clean equipment with clean tap water before the paint dries.
  6. Dryzone Mould-Resistant Emulsion Paint should not be covered with any other paint or wallpaper.

Videos

Reviews

There are no reviews yet.

Be the first to review “Dryzone Mould Resistant Emulsion Paint 5L”

Your email address will not be published. Required fields are marked *


SKU: DZ-AMP Categories: , , , , ,

Related products